Pibellau dur di-staen ASTM A312gosodir dimensiynau gan fanyleb ANSI ASME B36.19.
Pwysau Pibell ASTM A312
| Maint Pibell Enwol | Diamedr y tu allan | Dimensiynau Pibellau Dur Di-staen | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Atodlen 5S | Atodlen 10S | Atodlen 40S | Atodlen 80S | ||||||||||
| (mm) | (modfedd) | WT / PWYSAU | |||||||||||
| mm (mewn) | kg/m | mm (mewn) | kg/m | mm (mewn) | kg/m | mm (mewn) | kg/m | ||||||
| 1/8 | 10.3 | 0.405 | – | – | 1.25 (0.049) | 0.28 | 1.73 (0.068) | 0.37 | 2.42 (0.095) | 0.47 | |||
| 1/4 | 13.7 | 0.540 | – | – | 1.66 (0.065) | 0.49 | 2.24 (0.088) | 0.63 | 3.03 (0.119) | 0.80 | |||
| 3/8 | 17.2 | 0.675 | – | – | 1.66 (0.065) | 0.63 | 2.32 (0.091) | 0.85 | 3.20 (0.126) | 1.10 | |||
| 1/2 | 21.3 | 0.840 | 1.65 (0.065) | 0.81 | 2.11 (0.083) | 1.00 | 2.77 (0.109) | 1.27 | 3.74 (0.147) | 1.62 | |||
| 3/4 | 26.7 | 1.050 | 1.65 (0.065) | 1.02 | 2.11 (0.083) | 1.28 | 2.87 (0.113) | 1.68 | 3.92 (0.154) | 2.20 | |||
| 1 | 33.4 | 1.315 | 1.65 (0.065) | 1.30 | 2.77 (0.109) | 2.09 | 3.38 (0.133) | 2.50 | 4.55(0.179) | 3.24 | |||
| 1 1/4 | 42.2 | 1.660 | 1.65 (0.065) | 1.66 | 2.77 (0.109) | 2.69 | 3.56 (0.140) | 3.39 | 4.86 (0.191) | 4.47 | |||
| 1 1/2 | 48.3 | 1.900 | 1.65 (0.065) | 1.91 | 2.77 (0.109) | 3.11 | 3.69 (0.145) | 4.06 | 5.08 (0.200) | 5.41 | |||
| 2 | 60.3 | 2.375 | 1.65 (0.065) | 2.40 | 2.77 (0.109) | 3.93 | 3.92 (0.154) | 5.45 | 5.54 (0.218) | 7.49 | |||
| 2 1/2 | 73.0 | 2.875 | 2.11 (0.083) | 3.69 | 3.05 (0.120) | 5.26 | 5.16 (0.203) | 8.64 | 7.01 (0.276) | 11.4 | |||
| 3 | 88.9 | 3.500 | 2.11 (0.083) | 4.52 | 3.05 (0.120) | 6.46 | 5.49 (0.216) | 11.3 | 7.62 (0.300) | 15.3 | |||
| 3 1/2 | 101.6 | 4.000 | 2.11 (0.083) | 5.18 | 3.05 (0.120) | 7.41 | 5.74 (0.226) | 13.6 | 8.08 (0.318) | 18.6 | |||
| 4 | 114.3 | 4.500 | 2.11 (0.083) | 5.84 | 3.05 (0.120) | 8.37 | 6.02 (0.237) | 16.1 | 8.56 (0.337) | 22.3 | |||
| 5 | 141.3 | 5.563 | 2.77 (0.109) | 9.46 | 3.41 (0.134) | 11.6 | 6.56 (0.258) | 21.8 | 9.53 (0.375) | 31.0 | |||
| 6 | 168.3 | 6.625 | 2.77 (0.109) | 11.3 | 3.41 (0.134) | 13.9 | 7.12 (0.280) | 28.3 | 10.9 (0.432) | 42.6 | |||
| 8 | 219.1 | 8.625 | 2.77 (0.109) | 14.8 | 3.76 (0.148) | 20.0 | 8.18 (0.322) | 42.5 | 12.7 (0.500) | 64.6 | |||
| 10 | 273.1 | 10.750 | 3.41 (0.134) | 22.7 | 4.20 (0.165) | 27.8 | 9.28 (0.365) | 60.4 | 12.7 (0.500) | 81.5 | |||
| 12 | 323.9 | 12.750 | 3.97 (0.156) | 31.3 | 4.58 (0.180) | 36.1 | 9.53 (0.375) | 73.9 | 12.7 (0.500) | 97.4 | |||
Goddefgarwch Diamedr Pibell ASTM A312
| NPS | Goddefgarwch ASTM A312/ASME SA312 OD | |||
| + | – | |||
| modfedd | mm | modfedd | mm | |
| 1/8 i 1 1 /2 >1 1 /2 i 4 >4 i 8 >8 i 18 >18 i 26 >26 i 34 >34 i 48 |
1/64(0.015) 1/32(0.031) 1/16(0.062) 3/32(0.093) 1/8(0.125) 5/32(0.156) 3/16(0.187) |
0.4 0.8 1.6 2.4 3.2 4.0 4.8 |
1/32(0.031) 1/32(0.031) 1/32(0.031) 1/32(0.031) 1/32(0.031) 1/32(0.031) 1/32(0.031) |
0.8 0.8 0.8 0.8 0.8 0.8 0.8 |
ASTM A312 Pipe Wal Trwch Goddefiant
Y goddefiant trwch wal enwol yw +/- 12.5%.
| NPS | Goddefgarwch ASTM A312/ASME SA312 WT, % | |
| + | – | |
| 1/8-2 1 /2 | 20.0 | 12.5 |
| 3 ~ 18, t/D Llai na neu'n hafal i 5% | 22.5 | 12.5 |
| 3~18, t/D> 5% | 15.0 | 12.5 |
| Yn fwy na neu'n hafal i 20, wedi'i weldio | 17.5 | 12.5 |
| Mwy na neu'n hafal i 20, di-dor, t/D Llai na neu'n hafal i 5% | 22.5 | 12.5 |
| ≥ 20, seamless, t/D> 5% | 15.0 | 12.5 |
